Joystick C64 To C16

[Axis]

Hello,

I found a working C16.
But i have a rotten joystick with it.
I search after a schema to make a joystick adaptator to put a C64 joystick on it.

Someone have it ?

Thanks a lot.
Regards.

Axis

[donni]

Here you go:

[Axis]

Thanks donni.

I supposed that i don't use pin 5(potV) et 9(poyX) on C64 joystick and i don't use pin 8 (select') of c16 joy.

Can you confirm it ?

Thanks.

regards

[donni]

Thanks donni.

I supposed that i don't use pin 5(potV) et 9(poyX) on C64 joystick and i don't use pin 8 (select') of c16 joy.

Can you confirm it ?

Thanks.

regards

For a normal joystick you only need left/right/up/down/fire and GND.

-donni

[Axis]

Thanks donni.

[donni]

BTW if you replace the D-connector of a C64 joystick with a mini din-connector that fits into a C16, you have to solder the wire that was going to GND-pin of the D-connector to the select-pin on the C16 din-connector.

-donni

[Axis]

Thanks again donni