Table-based version
Directory /pub/cbm/c128/programming/documents/
Here you will find some Commodore 128 related programming information.
Most of these documents were downloaded from Herne Data System's CP/M
page http://www.herne.com/cpm.htm.
- ../
- [Parent directory]
- 1571-dos.info.gz
- Basic information about the disk operating system in the 1571 drive
- 1571-formatting-mfm.gz
- Tells how to format MFM disks on the 1571.
- 640x480-vdc.gz
- Examples of programming 640x480 graphics and 80x50 text with the VDC
in the C128. The graphics requires 64 kB of VDC RAM.
- basic-diskcommands.gz
- Using disk commands from BASIC
- batch-programming.gz
- Batch programming on the C128 (and C64 and VIC-20). (Read data from a disk
file as if it was typed in from the keyboard.)
- burstmode-basic.gz
- How to use the 1571 Burst mode from BASIC
- burstmode-intro.gz
- Introduction to the Burst mode
- burstmode-read.gz
- Burst mode documentation, Read protocol
- burstmode-write.gz
- Burst mode documentation, Write protocol
- c128-autobooting.gz
- Auto Booting on C-128
- intro.1571-1581.gz
- Introduction to the 1571 and 1581 drives
- tuning-vdc-performance.gz
- Tuning the performance of the VDC chip.
- using-files.gz
- Effective use of files
[FTP://NIC.FUNET.FI/pub/cbm/c128/programming/documents/ | SunSITE ftp | SunSITE http]
[email protected]