Page 1 of 1
Problem with Commodore Ultimax - no video
Posted: Wed Mar 23, 2005 9:51 pm
by krispy
I just recently purchased a Commodore Ultimax, but it is not showing any video on my TV. The unit is getting power, because the cassette is getting power, but no video. I think these are NTSC units, but you only get Channel 1 or 2, vs our North American Commodores which have channel 3 or 4.
Any ideas anyone?
Posted: Tue Mar 29, 2005 1:29 am
by administrator
Because the MAX Machine is minor derivative of the 64, you will likely find the C64 Diagnostic grid to be useful, see:
http://www.commodore.ca/manuals/Tips/c64_tips.htm
MAX Machine Problems
Posted: Wed Apr 20, 2005 11:35 pm
by krispy
Thanks for the information.
I also found out that the the Max machine does not have any ROM built in and it access this information from the cartridges that are plugged in. Waiting for them to show up from a friend in Germany to test. I'll keep you posted.
Ultimax
Posted: Mon Apr 25, 2005 11:38 pm
by krispy
Still no video showing up even after cartridge is inserted. I'll have to follow your previous link to see if there is anything I can do. It is a real shame since cosmetically the unit is the nicest one I have ever seen online.
Posted: Tue Apr 26, 2005 8:49 pm
by Dayzt
Try plugging it in Krispy....lol.
Just kidding - i'm guessing maybe it's some sort of PAL problem..?
Re: Ultimax
Posted: Tue Jun 21, 2005 5:26 am
by Guest
krispy wrote:Still no video showing up even after cartridge is inserted.
With "no video showing" you mean only static or a black screen ?
If it's only static, you'r tv probably isn't able to tune-in on channel 1 or 2 of this japanese unit.
Even if you have no cartridge inserted, you should get a black picture.