Page 1 of 1
Joystick C64 To C16
Posted: Sat Mar 01, 2008 8:52 am
by Axis
Hello,
I found a working C16.
But i have a rotten joystick with it.
I search after a schema to make a joystick adaptator to put a C64 joystick on it.
Someone have it ?
Thanks a lot.
Regards.
Axis
Posted: Sun Mar 02, 2008 12:16 am
by donni
Here you go:
Posted: Mon Mar 03, 2008 10:24 am
by Axis
Thanks donni.
I supposed that i don't use pin 5(potV) et 9(poyX) on C64 joystick and i don't use pin 8 (select') of c16 joy.
Can you confirm it ?
Thanks.
regards
Posted: Tue Mar 04, 2008 2:13 am
by donni
Axis wrote:Thanks donni.
I supposed that i don't use pin 5(potV) et 9(poyX) on C64 joystick and i don't use pin 8 (select') of c16 joy.
Can you confirm it ?
Thanks.
regards
For a normal joystick you only need left/right/up/down/fire and GND.
-donni
Posted: Thu Mar 06, 2008 6:13 am
by Axis
Thanks donni.
Posted: Fri Mar 07, 2008 9:25 am
by donni
BTW if you replace the D-connector of a C64 joystick with a mini din-connector that fits into a C16, you have to solder the wire that was going to GND-pin of the D-connector to the select-pin on the C16 din-connector.
-donni
Re: Joystick C64 To C16
Posted: Sun Feb 01, 2009 2:24 am
by Axis
Thanks again donni