Online article covering Cottonwood BBS!

This forum provides information on BBS' which Commodore hardware (and emulators) may connect

Moderators: wiskow, Trazan

Post Reply
wiskow
Posts: 205
Joined: Thu Nov 02, 2006 9:14 pm
Are you a real person?: No... I am a spambot, delete my account!
Location: San Diego, California, USA
Contact:

Online article covering Cottonwood BBS!

Post by wiskow »

A short article was written about my BBS by the webmaster of the Vintage Computing and Gaming website, and he currently has it up on the website's main page.

You can view the article at the following address:
http://www.vintagecomputing.com/index.php/archives/244
User avatar
rbernardo
Posts: 3141
Joined: Fri Jun 09, 2006 8:00 pm
Are you a real person?: No... I am a spambot, delete my account!
Location: Visalia, California, USA
Contact:

Re: Online article covering Cottonwood BBS!

Post by rbernardo »

wiskow wrote:You can view the article at the following address:
http://www.vintagecomputing.com/index.php/archives/244
Ah, nice to see your set-up, Andrew.

Truly,
Robert Bernardo
Fresno Commodore User Group
http://videocam.net.au/fcug
________________
Robert Bernardo
Fresno Commodore User Group
http://www.dickestel.com/fcug.htm
wiskow
Posts: 205
Joined: Thu Nov 02, 2006 9:14 pm
Are you a real person?: No... I am a spambot, delete my account!
Location: San Diego, California, USA
Contact:

Re: Online article covering Cottonwood BBS!

Post by wiskow »

rbernardo wrote: Ah, nice to see your set-up, Andrew.

Truly,
Robert Bernardo
Fresno Commodore User Group
http://videocam.net.au/fcug
Robert,
I changed my setup around... so I've updated the photo as well... Check it out at the Cottonwood BBS informational website:
http://www.wiskow.hpg.ig.com.br/

-Andrew
gklinger
Posts: 116
Joined: Mon Jun 12, 2006 5:47 pm
Location: Toronto, CANADA
Contact:

Post by gklinger »

Andrew: The picture of your BBS on your website isn't coming up (bad link perhaps?) You might want to take a look at that.
Call me Golan; my parents did.
wiskow
Posts: 205
Joined: Thu Nov 02, 2006 9:14 pm
Are you a real person?: No... I am a spambot, delete my account!
Location: San Diego, California, USA
Contact:

Post by wiskow »

gklinger wrote:Andrew: The picture of your BBS on your website isn't coming up (bad link perhaps?) You might want to take a look at that.
Yeah, there were some issues with the website... I think it's fixed now... In any case, here's a direct link to the latest photo, if you'd like to see it:

http://www.wiskow.hpg.ig.com.br/cottonwoodbbs2.jpg
(notice the 1970's rotary-dial telephone) ;-)

-Andrew
gklinger
Posts: 116
Joined: Mon Jun 12, 2006 5:47 pm
Location: Toronto, CANADA
Contact:

Post by gklinger »

wiskow wrote:In any case, here's a direct link to the latest photo, if you'd like to see it:

http://www.wiskow.hpg.ig.com.br/cottonwoodbbs2.jpg
(notice the 1970's rotary-dial telephone) ;-)

-Andrew
Thanks for that. What caught my eye and confused me was that your 64c appears to have the dark brown keyboard from a breadbin 64 and the monitor looks like a 1084 but it's a lot lighter than I'm use to seeing. Franken-computer perhaps? :)
Call me Golan; my parents did.
wiskow
Posts: 205
Joined: Thu Nov 02, 2006 9:14 pm
Are you a real person?: No... I am a spambot, delete my account!
Location: San Diego, California, USA
Contact:

Post by wiskow »

gklinger wrote:Thanks for that. What caught my eye and confused me was that your 64c appears to have the dark brown keyboard from a breadbin 64 and the monitor looks like a 1084 but it's a lot lighter than I'm use to seeing. Franken-computer perhaps? :)
Golan,

You've got a keen eye! ;-)

The story behind the 64c is that I got it with two missing white keys that had been replaced with brown keys from an older c64. I actually prefer the older keys, with the graphic charachters on the front of the keys instead of on the tops, so I swapped the keyboard out with an older c64 parts computer I have.

The monitor is a "Magnavox Color Monitor 80". It came Commodore-ready with a 5-pin serial connector on one end of the cable, and audio/video RCA connectors on the other end. That was the monitor I had with my original c64, but the original one died on me. When I went to look for a replacement on eBay a few years back, I actually found the exact same model for sale, so I bought it. :-)

-Andrew
gklinger
Posts: 116
Joined: Mon Jun 12, 2006 5:47 pm
Location: Toronto, CANADA
Contact:

Post by gklinger »

Thanks for the explanation and yes, I am big nerd with no life.
Call me Golan; my parents did.
wiskow
Posts: 205
Joined: Thu Nov 02, 2006 9:14 pm
Are you a real person?: No... I am a spambot, delete my account!
Location: San Diego, California, USA
Contact:

Post by wiskow »

gklinger wrote:Thanks for the explanation and yes, I am big nerd with no life.
Isn't *everyone* here??? ;-)

By the way... Just saw this on eBay:
http://cgi.ebay.com/Magnavox-RGB-displa ... dZViewItem

It's the same monitor I have, although a slightly "updated" model. :-)

-Andrew
Gambit
Posts: 86
Joined: Thu Sep 07, 2006 7:01 pm
Contact:

Post by Gambit »

wiskow wrote: By the way... Just saw this on eBay:
...snip...
It's the same monitor I have, although a slightly "updated" model. :-)

-Andrew
Can you tell me what monitor I should get for my 128D? Is that one a good choice?

Currently all I have is a 1702, so I need something that allows the 128 to display in 80 column mode.
gklinger
Posts: 116
Joined: Mon Jun 12, 2006 5:47 pm
Location: Toronto, CANADA
Contact:

Post by gklinger »

Gambit wrote:Can you tell me what monitor I should get for my 128D?
Good news. You have lots of choices. You can use the monitors Commodore released specifically for the 128 like the 1901, 1902 and/or 1902a as well as some of the Amiga monitors like the 1070, 1080, 1084, 1084s, 1084s-DI and the 2002. There are probably a few others too (who can keep track?) As Andrew suggests, there are also a wealth of 3rd party monitors that support all of the 128's video modes. I should also point out that with the right cable your 1702 can display 80 column mode but only in monochrome. You're probably best off with one of the first three monitors that I listed though and while they're a little harder to find and a little more expensive than the 1701/1702, obtaining one shouldn't be too difficult.
Call me Golan; my parents did.
Gambit
Posts: 86
Joined: Thu Sep 07, 2006 7:01 pm
Contact:

Post by Gambit »

Yes sorry I took this post off topic when no doubt I could have searched and found the answer.

Its just the conversation was going and the question came out when I saw his post.
gklinger
Posts: 116
Joined: Mon Jun 12, 2006 5:47 pm
Location: Toronto, CANADA
Contact:

Post by gklinger »

Actually Gambit, Tequila's post is spam. What these parasites are doing these days is posting vague comments that sound like they could be on-topic so as to avoid being deleted by administrators. In point of fact, the post is meaningless and exists only so that people will click on the URL in their signature.

There are a variety of measures that can be introduced to make it more difficult for spammers. One forum I frequent doesn't allow new users to have a signature or an avatar until they've made 10 posts and they must enter a unique approval code on each and every one of those first 10 posts. It's a bit of a hassle but it seems to keep the scumbags at bay. Of all the web-based forums I visit (about 25), Commodore.ca seems to have one of the worst problem with spam and I suspect that the problem is that there aren't enough senior users looking out for and deleting such posts. Having a few people with clearance to delete such posts makes it much more likely that they'll be deleted before anyone sees them (which is a good thing because some of the spam posts I found today are quite offensive.) Anyway...

Admin: Please delete Tequila's post. It's not legitimate.
Call me Golan; my parents did.
wiskow
Posts: 205
Joined: Thu Nov 02, 2006 9:14 pm
Are you a real person?: No... I am a spambot, delete my account!
Location: San Diego, California, USA
Contact:

Post by wiskow »

Good call, Golan... Sorry I missed that one earlier... The post has now been deleted.

-Andrew
(aka Balzabaar)
SysOp - Cottonwood BBS
(951) 242-3593
http://hometown.aol.com/cottonwoodbbs
Post Reply