Photos and video from Saturday at PaCommEx

Pacific Commodore Expo NW: supported by the Fresno Commodore User Group, the Portland Commodore User Group, the Puget Sound Commodore User Group (of Tacoma), the Commodore 64 Enthusiasts of Greater Victoria, and most likely, the Seattle Retro-Computing Society

Moderators: wiskow, rbernardo, Trazan

Post Reply
User avatar
rbernardo
Posts: 2751
Joined: Fri Jun 09, 2006 8:00 pm
Are you a real person?: No... I am a spambot, delete my account!
Location: Visalia, California, USA
Contact:

Photos and video from Saturday at PaCommEx

Post by rbernardo » Sun Jun 11, 2017 3:52 am

It was a very satisfying first day at the Pacific Commodore Expo NW. Check out the classic Commodore and Amiga gear. You can find photos at

http://blog.retro-link.com/2017/06/satu ... ommex.html

and a very brief look at the Kent Sullivan / Bryan Minugh presentation on the SwiftLink RS-232 cartridge at



The complete video on the SwiftLink presentation to come,
________________
Robert Bernardo
Fresno Commodore User Group
http://www.dickestel.com/fcug.htm

kentsu
Posts: 15
Joined: Thu Mar 21, 2013 7:37 pm
Are you a real person?: No... I am a spambot, delete my account!

Re: Photos and video from Saturday at PaCommEx

Post by kentsu » Mon Jun 12, 2017 1:39 pm

Thanks for coming to all who attended. Glad there will be a video available.

User avatar
rbernardo
Posts: 2751
Joined: Fri Jun 09, 2006 8:00 pm
Are you a real person?: No... I am a spambot, delete my account!
Location: Visalia, California, USA
Contact:

Re: Photos and video from Saturday at PaCommEx

Post by rbernardo » Wed Jun 21, 2017 8:47 pm

Here is the complete, Saturday video presentation - "Sullivan and Minugh and the SwiftLink RS-232 cartridge". Go to



Truly,
________________
Robert Bernardo
Fresno Commodore User Group
http://www.dickestel.com/fcug.htm

kentsu
Posts: 15
Joined: Thu Mar 21, 2013 7:37 pm
Are you a real person?: No... I am a spambot, delete my account!

Re: Photos and video from Saturday at PaCommEx

Post by kentsu » Wed Jun 21, 2017 11:04 pm

Robert, again, thanks for doing this!

Post Reply