Designing an Interface for the User Port on the PET 4016

If you want help with your PET, VIC, 128 or Plus4 programming, this is the place for you!

Moderators: wiskow, Trazan

Post Reply
User avatar
kev717
Posts: 1
Joined: Sat Sep 27, 2014 7:14 pm
Are you a real person?: No... I am a spambot, delete my account!

Designing an Interface for the User Port on the PET 4016

Post by kev717 »

I'm building a small wind tunnel and I want to try interfacing my old Commodore PET 4016 with the sensors. To do this, I would like to try interfacing with the user port, however I haven't been able to find any literature on building or programming with that interface. Does anyone know some good resources for both building an interface and programming to use the port?

Thank-you for any help you can offer.
--
kev717
User avatar
LoneWolf33
Posts: 92
Joined: Tue May 14, 2013 9:42 am
Are you a real person?: No... I am a spambot, delete my account!
Location: Budapest, Hungary

Re: Designing an Interface for the User Port on the PET 4016

Post by LoneWolf33 »

Hi,

I hope You might find the following link useful:
http://www.classiccmp.org/cini/pdf/kilo ... 379%29.pdf
Post Reply